lkml.org 
[lkml]   [2024]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/7] serial: exar: moved generic_rs485 further up in 8250_exar.c
Date
From: Parker Newman <pnewman@connecttech.com>

Preparatory patch moving generic_rs485_config and
generic_rs485_supported higher in the file to allow for CTI setup
functions to use them.

Signed-off-by: Parker Newman <pnewman@connecttech.com>
---
Changes in v3:
- split into separate preparatory patch

drivers/tty/serial/8250/8250_exar.c | 50 ++++++++++++++---------------
1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index f14f73d250bb..e68029a59122 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -197,6 +197,31 @@ struct exar8250 {
int line[];
};

+static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
+ struct serial_rs485 *rs485)
+{
+ bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
+ u8 __iomem *p = port->membase;
+ u8 value;
+
+ value = readb(p + UART_EXAR_FCTR);
+ if (is_rs485)
+ value |= UART_FCTR_EXAR_485;
+ else
+ value &= ~UART_FCTR_EXAR_485;
+
+ writeb(value, p + UART_EXAR_FCTR);
+
+ if (is_rs485)
+ writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
+
+ return 0;
+}
+
+static const struct serial_rs485 generic_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
+};
+
static void exar_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
/*
@@ -459,27 +484,6 @@ static void xr17v35x_unregister_gpio(struct uart_8250_port *port)
port->port.private_data = NULL;
}

-static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
- struct serial_rs485 *rs485)
-{
- bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
- u8 __iomem *p = port->membase;
- u8 value;
-
- value = readb(p + UART_EXAR_FCTR);
- if (is_rs485)
- value |= UART_FCTR_EXAR_485;
- else
- value &= ~UART_FCTR_EXAR_485;
-
- writeb(value, p + UART_EXAR_FCTR);
-
- if (is_rs485)
- writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
-
- return 0;
-}
-
static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termios,
struct serial_rs485 *rs485)
{
@@ -518,10 +522,6 @@ static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termio
return 0;
}

-static const struct serial_rs485 generic_rs485_supported = {
- .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
-};
-
static const struct exar8250_platform exar8250_default_platform = {
.register_gpio = xr17v35x_register_gpio,
.unregister_gpio = xr17v35x_unregister_gpio,
--
2.43.2

\
 
 \ /
  Last update: 2024-04-17 22:32    [W:0.158 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site