lkml.org 
[lkml]   [2024]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/3] Add phyBOARD-Segin-i.MX93 support
Date
Hello,

This adds support for the phyBOARD-Segin-i.MX93 board.
In this v5, I removed the gpio-line-names that were controversial.

Thanks,

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
Changes in v5:
- Remove the gpio-line-names
- Fix the product URLs
Changes in v4:
- Add gpio-line-names to gpio-vf610 dt-bindings documentation
- Add the heartbeat SoM LED
- Add support for the FEC ethernet port
- Restore the original authors in the copyright
- Add gpio-line-names for the GPIOs on the X16 header
Changes in v3:
- Update documentation to match PHYTEC naming
- Remove useless properties
- Update pinmux from PHYTEC downstream kernel
Changes in v2:
- Remove useless line
- Add missing reserved-memory entries

v4: https://lore.kernel.org/linux-devicetree/20240122095306.14084-1-othacehe@gnu.org/

Mathieu Othacehe (3):
dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
dt-bindings: gpio: gpio-vf610: add gpio-line-names
arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support

.../devicetree/bindings/arm/fsl.yaml | 6 +
.../devicetree/bindings/gpio/gpio-vf610.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx93-phyboard-segin.dts | 117 ++++++++++++++++
.../boot/dts/freescale/imx93-phycore-som.dtsi | 126 ++++++++++++++++++
5 files changed, 252 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

--
2.41.0


\
 
 \ /
  Last update: 2024-05-27 14:31    [W:0.088 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site