lkml.org 
[lkml]   [2024]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: i2c: ar0521: fix spellos
Date
Fix spelling mistakes as reported by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-media@vger.kernel.org
---
drivers/media/i2c/ar0521.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff -- a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
--- a/drivers/media/i2c/ar0521.c
+++ b/drivers/media/i2c/ar0521.c
@@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052
* In the clock tree:
* MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2
*
- * Generic pixel_rate to bus clock frequencey equation:
+ * Generic pixel_rate to bus clock frequency equation:
* MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2
*
* From which we derive the PIXEL_CLOCK to use in the clock tree:
@@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052
*
* TODO: in case we have less data lanes we have to reduce the desired
* VCO not to exceed the limits specified by the datasheet and
- * consequentially reduce the obtained pixel clock.
+ * consequently reduce the obtained pixel clock.
*/
pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count;
bpp = ar0521_code_to_bpp(sensor);
@@ -806,7 +806,7 @@ static const struct initial_reg {
REGS(be(0x3F00),
be(0x0017), /* 3F00: BM_T0 */
be(0x02DD), /* 3F02: BM_T1 */
- /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */
+ /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */
be(0x0020),
/* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */
be(0x0040),
\
 
 \ /
  Last update: 2024-01-11 05:36    [W:3.192 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site