Messages in this thread | | | From | Udit Kumar <> | Subject | [PATCH v2 0/5] arm64: dts: ti: k3-j7200: Add properties and sync with uboot | Date | Thu, 1 Jun 2023 15:07:39 +0530 |
| |
In continuation of patch series posted by Nishanth for sync of uboot device tree with kernel device tree for AM64 SOC. https://lore.kernel.org/linux-arm-kernel/20230414073328.381336-1-nm@ti.com/
This series extend device tree sync/clean up for J7200 SOC.
This patch series build on top of https://lore.kernel.org/all/20230419040007.3022780-1-u-kumar1@ti.com
Changes since v1: https://lore.kernel.org/all/20230426103219.1565266-1-u-kumar1@ti.com/ * Add general purpose timers: Addded CLKSEL_VD clock for odd numbered timers Marked MCU_Timer as reserved, fixed clock index for main_timer13
*Configure pinctrl for timer IO pads Marked mcu_timerio_input as reserved
*main_pmx0 clean up Splitted into two patches, One for UART and second for i2c duplication removal
*Add uart pin mux in wkup_pmx0 No change
*Add bootph-pre-ram for u-boot patch dropped, later will add bootph-pre-ram property later for all nodes.
Udit Kumar (5): arm64: dts: ti: k3-j7200: Add general purpose timers arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads arm64: dts: ti: k3-j7200-common-proc-board: main_pmx0 clean up arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux arm64: dts: ti: k3-j7200-common-proc-board: Add uart pin mux in wkup_pmx0
.../dts/ti/k3-j7200-common-proc-board.dts | 32 ++- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 258 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 150 ++++++++++ 3 files changed, 436 insertions(+), 4 deletions(-)
-- 2.34.1
| |