lkml.org 
[lkml]   [2023]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] thermal/drivers/imx: Remove get_trip_temp ops
Date
The i.MX thermal sensor uses the generic trip points. The thermal
framework can return the critical temperature directly.

Remove the pointless get_trip_temp ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/imx_thermal.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index c3136978adee..69ed482167f7 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -330,13 +330,6 @@ static int imx_change_mode(struct thermal_zone_device *tz,
return 0;
}

-static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
-{
- *temp = trips[IMX_TRIP_CRITICAL].temperature;
-
- return 0;
-}
-
static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
int temp)
{
@@ -384,7 +377,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
.unbind = imx_unbind,
.get_temp = imx_get_temp,
.change_mode = imx_change_mode,
- .get_crit_temp = imx_get_crit_temp,
.set_trip_temp = imx_set_trip_temp,
};

--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:51    [W:0.078 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site