lkml.org 
[lkml]   [2023]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 12/14] arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
Date
From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

0.8V is outside of the operating voltage specified for imx8mq, see
chapter 3.1.4 "Operating ranges" of the IMX8MDQLQCEC document.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f557632f574fa..7e70663cffa30 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -841,7 +841,7 @@ buck1_reg: BUCK1 {
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <880000>;
rohm,dvs-idle-voltage = <820000>;
- rohm,dvs-suspend-voltage = <800000>;
+ rohm,dvs-suspend-voltage = <810000>;
regulator-always-on;
};

--
2.30.2
\
 
 \ /
  Last update: 2023-03-27 00:52    [W:0.079 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site