lkml.org 
[lkml]   [2023]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] Add EMAC3 support for sa8540p-ride (devicetree/clk bits)
Date
This is a forward port / upstream refactor of code delivered
downstream by Qualcomm over at [0] to enable the DWMAC5 based
implementation called EMAC3 on the sa8540p-ride dev board.

From what I can tell with the board schematic in hand,
as well as the code delivered, the main changes needed are:

1. A new address space layout for /dwmac5/EMAC3 MTL/DMA regs
2. A new programming sequence required for the EMAC3 base platforms


This series addresses the devicetree and clock changes to support this
hardware bringup.

As requested[1], it has been split up by compile time / maintainer tree.
The associated v3 of the netdev specific changes can be found at [2].
Together, they result in the ethernet controller working for
both controllers on this platform.

[0] https://git.codelinaro.org/clo/la/kernel/ark-5.14/-/commit/510235ad02d7f0df478146fb00d7a4ba74821b17
[1] https://lore.kernel.org/netdev/20230320202802.4e7dc54c@kernel.org/
[2] https://lore.kernel.org/netdev/20230331214549.756660-1-ahalaney@redhat.com/T/#m0afcad0e8031c02bcb5dbfb86cb8acfc287968fe

v2: https://lore.kernel.org/netdev/20230320221617.236323-1-ahalaney@redhat.com/
v1: https://lore.kernel.org/netdev/20230313165620.128463-1-ahalaney@redhat.com/

Thanks,
Andrew

Andrew Halaney (3):
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
arm64: dts: qcom: sc8280xp: Add ethernet nodes
arm64: dts: qcom: sa8540p-ride: Add ethernet nodes

arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 181 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 59 ++++++
drivers/clk/qcom/gcc-sc8280xp.c | 18 ++
include/dt-bindings/clock/qcom,gcc-sc8280xp.h | 2 +
4 files changed, 260 insertions(+)

--
2.39.2

\
 
 \ /
  Last update: 2023-04-01 00:00    [W:0.064 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site