lkml.org 
[lkml]   [2023]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RESEND PATCH 0/4] arm64: dts: qcom: Use proper WSA881x shutdown GPIO polarity
Date
Hi,

Resending after all dependencies got merged. The DTS changes are not
compatible with kernel older than v6.3-rc1 (where the driver changes were
merged).

Description
===========
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high. Since Linux driver were updated to
handle proper flag, correct the DTS.

Best regards,
Krzysztof

Krzysztof Kozlowski (4):
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown
GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown
GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO
polarity
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO
polarity

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2023-03-27 01:13    [W:0.053 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site