lkml.org 
[lkml]   [2023]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: nvmem: allow MTD to be explicitly an NVMEM provider
Date
From: Rafał Miłecki <rafal@milecki.pl>

There are a lot of devices with NVMEM content stored in MTD devices in
relevant partitions. Add a DT binding for marking such partitions.

Note: Linux already treats every MTD partition as NVMEM provider so in
general it doesn't need to care about this binding. It's meant just to
make DT clearer in describing hardware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
As explained in commit body this isn't really needed for Linux. I
thought it'd be a small nice addition for writing clear DTS files.
---
.../devicetree/bindings/nvmem/mtd.yaml | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/mtd.yaml

diff --git a/Documentation/devicetree/bindings/nvmem/mtd.yaml b/Documentation/devicetree/bindings/nvmem/mtd.yaml
new file mode 100644
index 000000000000..7435b2803cf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mtd.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD access based NVMEM
+
+description: |
+ MTD partitions can be NVMEM providers. This binding allows explicitly marking
+ such partitions.
+
+ The exact way of handling MTD partition content (NVMEM cells) should be
+ described using a proper NVMEM layout.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+ - $ref: nvmem.yaml#
+ - $ref: /schemas/mtd/partitions/partition.yaml#
+
+properties:
+ compatible:
+ const: mtd-nvmem
+
+ reg:
+ maxItems: 1
+
+required:
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "mtd-nvmem";
+ reg = <0x0 0x40000>;
+ label = "device-data";
+
+ nvmem-layout {
+ /* Just a dummy example: Kontron can be found on OTP actually */
+ compatible = "kontron,sl28-vpd";
+ };
+ };
+ };
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:53    [W:0.033 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site