lkml.org 
[lkml]   [2023]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] drivers: watchdog: marvell_gti: fix zero pretimeout handling
Date
When pretimeout is set to 0 then do not reprogram timer
with zero timeout, this will reset device immediately.
Also disable interrupt to stop pretimeout notification.

Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
---
drivers/watchdog/marvell_gti_wdt.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/watchdog/marvell_gti_wdt.c b/drivers/watchdog/marvell_gti_wdt.c
index d7eb8286e11e..25b7ce0f0738 100644
--- a/drivers/watchdog/marvell_gti_wdt.c
+++ b/drivers/watchdog/marvell_gti_wdt.c
@@ -190,6 +190,13 @@ static int gti_wdt_set_pretimeout(struct watchdog_device *wdev,
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
struct watchdog_device *wdog_dev = &priv->wdev;

+ if (!timeout) {
+ /* Disable Interrupt */
+ writeq(GTI_CWD_INT_ENA_CLR_VAL(priv->wdt_timer_idx),
+ priv->base + GTI_CWD_INT_ENA_CLR);
+ return 0;
+ }
+
/* pretimeout should 1/3 of max_timeout */
if (timeout * 3 <= wdog_dev->max_timeout)
return gti_wdt_settimeout(wdev, timeout * 3);
--
2.34.1
\
 
 \ /
  Last update: 2023-10-09 06:42    [W:0.114 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site