lkml.org 
[lkml]   [2023]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net 0/3] Fixes for lynx-28g PHY driver
Date
This series fixes some issues in the Lynx 28G SerDes driver, namely an
oops when unloading the module, a race between the periodic workqueue
and the PHY API, and a race between phy_set_mode_ext() calls on multiple
lanes on the same SerDes.

Ioana Ciornei (1):
phy: lynx-28g: cancel the CDR check work item on the remove path

Vladimir Oltean (2):
phy: lynx-28g: lock PHY while performing CDR lock workaround
phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared
registers

drivers/phy/freescale/phy-fsl-lynx-28g.c | 27 +++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
---

I have some more work pending on this driver, hopefully for this
development cycle, which is entangled with net-next. Can this series go
through the networking tree, with the PHY maintainers' Ack? The original
driver submission also went through net-next.

--
2.34.1

\
 
 \ /
  Last update: 2023-10-04 13:18    [W:0.058 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site