lkml.org 
[lkml]   [2023]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] soc: xilinx: Fix for call trace due to the usage of smp_processor_id()
Date
From: HariBabu Gattem <haribabu.gattem@xilinx.com>

When preemption is enabled in kernel and if any task which can be
preempted should not use smp_processor_id() directly, since CPU
switch can happen at any time, the previous value of cpu_id
differs with current cpu_id. As a result we see the below call trace
during xlnx_event_manager_probe.

[ 6.140197] dump_backtrace+0x0/0x190
[ 6.143884] show_stack+0x18/0x40
[ 6.147220] dump_stack_lvl+0x7c/0xa0
[ 6.150907] dump_stack+0x18/0x34
[ 6.154241] check_preemption_disabled+0x124/0x134
[ 6.159068] debug_smp_processor_id+0x20/0x2c
[ 6.163453] xlnx_event_manager_probe+0x48/0x250

To protect cpu_id, It is recommended to use get_cpu()/put_cpu()
to disable preemption, get the cpu_id and enable preemption respectively.
(For Reference, Documentation/locking/preempt-locking.rst and
Documentation/kernel-hacking/hacking.rst)

Use preempt_disable()/smp_processor_id()/preempt_enable()
API's to achieve the same.

Signed-off-by: HariBabu Gattem <haribabu.gattem@xilinx.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
---
drivers/soc/xilinx/xlnx_event_manager.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/xilinx/xlnx_event_manager.c b/drivers/soc/xilinx/xlnx_event_manager.c
index 86a048a10a13..edfb1d5c10c6 100644
--- a/drivers/soc/xilinx/xlnx_event_manager.c
+++ b/drivers/soc/xilinx/xlnx_event_manager.c
@@ -555,7 +555,7 @@ static void xlnx_disable_percpu_irq(void *data)
static int xlnx_event_init_sgi(struct platform_device *pdev)
{
int ret = 0;
- int cpu = smp_processor_id();
+ int cpu;
/*
* IRQ related structures are used for the following:
* for each SGI interrupt ensure its mapped by GIC IRQ domain
@@ -592,9 +592,12 @@ static int xlnx_event_init_sgi(struct platform_device *pdev)
sgi_fwspec.param[0] = sgi_num;
virq_sgi = irq_create_fwspec_mapping(&sgi_fwspec);

+ cpu = get_cpu();
per_cpu(cpu_number1, cpu) = cpu;
ret = request_percpu_irq(virq_sgi, xlnx_event_handler, "xlnx_event_mgmt",
&cpu_number1);
+ put_cpu();
+
WARN_ON(ret);
if (ret) {
irq_dispose_mapping(virq_sgi);
--
2.17.1
\
 
 \ /
  Last update: 2023-10-27 08:48    [W:6.590 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site