lkml.org 
[lkml]   [2023]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] arm64: dts: qcom: ipq9574: enable GPIO based LED
Add support for wlan-2g LED on GPIO64.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
---
arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 49c9b6478357..b6f90da31778 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -51,6 +51,18 @@ button-wps {
debounce-interval = <60>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
};

&blsp1_spi0 {
@@ -117,6 +129,13 @@ gpio_keys_default: gpio-keys-default-state {
drive-strength = <8>;
bias-pull-up;
};
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
};

&usb_0_dwc3 {
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231025-ipq9574-led-8bdaab4c9cf6
Best regards,
--
Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>

\
 
 \ /
  Last update: 2023-10-25 09:00    [W:0.039 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site