lkml.org 
[lkml]   [2023]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: resolver: ad2s1210: add reset gpio support
Date
This adds support for the optional reset gpio to the ad2s1210 resolver
driver. If the gpio is present in the device tree, it is toggled during
driver probe before the reset of the device initialization. As per the
devicetree bindings, it is expected for the gpio to configured as active
low.

Suggested-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
drivers/iio/resolver/ad2s1210.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c
index 8646389ec88d..a414eef12e5e 100644
--- a/drivers/iio/resolver/ad2s1210.c
+++ b/drivers/iio/resolver/ad2s1210.c
@@ -1426,6 +1426,7 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
{
struct device *dev = &st->sdev->dev;
struct gpio_descs *resolution_gpios;
+ struct gpio_desc *reset_gpio;
DECLARE_BITMAP(bitmap, 2);
int ret;

@@ -1481,6 +1482,17 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
"failed to set resolution gpios\n");
}

+ /* If the optional reset GPIO is present, toggle it to do a hard reset. */
+ reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(reset_gpio),
+ "failed to request reset GPIO\n");
+
+ if (reset_gpio) {
+ udelay(10);
+ gpiod_set_value(reset_gpio, 0);
+ }
+
return 0;
}

--
2.42.0
\
 
 \ /
  Last update: 2023-10-16 17:44    [W:0.054 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site