lkml.org 
[lkml]   [2023]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
Date
This series adds support for the Aquacomputer High Flow USB and MPS Flow
flow sensor devices, which communicate through a proprietary USB protocol.

Patch 1 resolves the case when devices that communicate through the legacy
way (such as these) don't contain a reading for a sensor, in which case
-ENODATA is now returned.

Patch 2 adds support for the devices and implements reading their
temperature and flow sensors.

Aleksa Savic (2):
hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices
are connected
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow
USB and MPS Flow

Documentation/hwmon/aquacomputer_d5next.rst | 7 ++
drivers/hwmon/aquacomputer_d5next.c | 72 +++++++++++++++++++--
2 files changed, 74 insertions(+), 5 deletions(-)

--
2.41.0

\
 
 \ /
  Last update: 2023-10-16 10:39    [W:0.098 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site