lkml.org 
[lkml]   [2023]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support
Date
The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.

Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2: Add properties no-sd; and no-sdio; to emmc node
Moved emmc_pins to respect sort order
Added Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

.../boot/dts/renesas/r9a09g011-v2mevk2.dts | 124 ++++++++++++++++++
1 file changed, 124 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
index d6737395df67..36a2afeb6c74 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -7,6 +7,7 @@

/dts-v1/;
#include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzv2m-pinctrl.h>

/ {
@@ -35,6 +36,36 @@ memory@180000000 {
device_type = "memory";
reg = <0x1 0x80000000 0x0 0x80000000>;
};
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 0>, <1800000 1>;
+ };
};

&avb {
@@ -50,6 +81,24 @@ phy0: ethernet-phy@0 {
};
};

+&emmc {
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_1v8>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ max-frequency = <200000000>;
+ status = "okay";
+};
+
+
&extal_clk {
clock-frequency = <48000000>;
};
@@ -69,6 +118,26 @@ &i2c2 {
};

&pinctrl {
+ emmc_pins: emmc {
+ emmc_pins_data {
+ pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+ <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+ <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+ <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+ <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+ <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+ <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+ <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+ power-source = <1800>;
+ };
+
+ emmc_pins_ctrl {
+ pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+ <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+ power-source = <1800>;
+ };
+ };
+
i2c0_pins: i2c0 {
pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
<RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
@@ -78,6 +147,48 @@ i2c2_pins: i2c2 {
pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
<RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
};
+
+ sdhi0_pins: sd0 {
+ sd0_data {
+ pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+ <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+ <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+ <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+ power-source = <3300>;
+ };
+
+ sd0_ctrl {
+ pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+ <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+ power-source = <3300>;
+ };
+
+ sd0_cd {
+ pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+ power-source = <3300>;
+ };
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ sd0_data_uhs {
+ pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+ <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+ <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+ <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+ power-source = <1800>;
+ };
+
+ sd0_ctrl_uhs {
+ pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+ <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+ power-source = <1800>;
+ };
+
+ sd0_cd_uhs {
+ pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+ power-source = <1800>;
+ };
+ };
};

&pwc {
@@ -85,6 +196,19 @@ &pwc {
status = "okay";
};

+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:02    [W:0.039 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site