lkml.org 
[lkml]   [2023]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectfixed-regulator with enable from another regulator
Hello all,
I am trying to figure out if it is possible with the current
regulator-fixed or with any other solution already implemented in Linux
to have a regulator enabled from another one.

I am not talking about the regulator vin-supply, I am really talking
about the enable input signal of a LDO connected to the output of another
regulator, a sort of "chained" regulator.

As an example something like this

<reg_1v8>[out] ---> [vin-supply]<reg_1v0>[out] --->
<reg_3v3>[out] ---> [enable]

<reg_1v8>[out] ---> [vin-supply]<reg_1v2>[out] --->
<reg_3v3>[out] ---> [enable]

<gpio1> ---> [enable]<reg_3v3>[out]--->

in which toggling <gpio1> control 3 different outputs.

I am still not 100% sure if describing this specific hardware connection
would be required on my system, maybe I can just ignore all of that.

Any thought?

Francesco

\
 
 \ /
  Last update: 2023-03-27 00:00    [W:0.040 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site