lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] mtd: spinand: macronix: use scratch buffer for DMA operation
The mx35lf1ge4ab_get_eccsr() function uses an SPI DMA operation to
read the eccsr, hence the buffer should not be on stack. Since commit
380583227c0c7f ("spi: spi-mem: Add extra sanity checks on the op param")
the kernel emmits a warning and blocks such operations.

Use the scratch buffer to get eccsr instead of trying to directly read
into a stack-allocated variable.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/mtd/nand/spi/macronix.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index dce835132a1e2..722a9738ba370 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -83,9 +83,10 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
* in order to avoid forcing the wear-leveling layer to move
* data around if it's not necessary.
*/
- if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
+ if (mx35lf1ge4ab_get_eccsr(spinand, spinand->scratchbuf))
return nanddev_get_ecc_conf(nand)->strength;

+ eccsr = *spinand->scratchbuf;
if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
!eccsr))
return nanddev_get_ecc_conf(nand)->strength;
--
2.39.1
\
 
 \ /
  Last update: 2023-03-26 23:47    [W:0.028 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site