lkml.org 
[lkml]   [2023]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] HID: amd_sfh: if no sensors are enabled, clean up
Date
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.

Before this commit 3 sensors were reported, but they were not actually
functional. After this commit the sensors are no longer reported, but
also the resume time increased.

To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.

Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Tested-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
drivers/hid/amd-sfh-hid/amd_sfh_client.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_client.c b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
index ab125f79408f2..7469691b4a633 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
@@ -227,6 +227,7 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
cl_data->num_hid_devices = amd_mp2_get_sensor_num(privdata, &cl_data->sensor_idx[0]);
if (cl_data->num_hid_devices == 0)
return -ENODEV;
+ cl_data->hid_dev_count = cl_data->num_hid_devices;

INIT_DELAYED_WORK(&cl_data->work, amd_sfh_work);
INIT_DELAYED_WORK(&cl_data->work_buffer, amd_sfh_work_buffer);
@@ -301,12 +302,18 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
cl_data->sensor_sts[i]);
goto cleanup;
}
+ } else {
+ mp2_ops->stop(privdata, cl_data->sensor_idx[i]);
+ status = amd_sfh_wait_for_response
+ (privdata, cl_data->sensor_idx[i], SENSOR_DISABLED);
+ cl_data->hid_dev_count--;
}
dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
cl_data->sensor_idx[i], get_sensor_name(cl_data->sensor_idx[i]),
cl_data->sensor_sts[i]);
}
- if (mp2_ops->discovery_status && mp2_ops->discovery_status(privdata) == 0) {
+ if (!cl_data->hid_dev_count ||
+ (mp2_ops->discovery_status && mp2_ops->discovery_status(privdata) == 0)) {
amd_sfh_hid_client_deinit(privdata);
for (i = 0; i < cl_data->num_hid_devices; i++) {
devm_kfree(dev, cl_data->feature_report[i]);
--
2.34.1
\
 
 \ /
  Last update: 2023-03-26 23:38    [W:0.051 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site