lkml.org 
[lkml]   [2023]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: msm8998: Use RPM XO
Date
Feed GCC and SDHC_2 with the RPM XO instead of the fixed-clock one.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 746f4e42a53f..4d59f4f8fc4a 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -809,7 +809,7 @@ gcc: clock-controller@100000 {
reg = <0x00100000 0xb0000>;

clock-names = "xo", "sleep_clk";
- clocks = <&xo>, <&sleep_clk>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;

/*
* The hypervisor typically configures the memory region where these clocks
@@ -2310,7 +2310,7 @@ sdhc2: mmc@c0a4900 {
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&xo>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
bus-width = <4>;
status = "disabled";
};
--
2.39.0
\
 
 \ /
  Last update: 2023-03-26 23:34    [W:0.028 / U:2.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site