Messages in this thread | | | From | Nicolas Saenz Julienne <> | Subject | [RFC 0/2] sdhci-iproc CMD timeouts | Date | Thu, 25 Feb 2021 10:52:14 +0100 |
| |
I'm seeing a rather odd behavior from sdhci-iproc's integration in BCM2711 (Raspberry Pi 4's SoC), and would appreciate some opinions.
The controller will timeout on SDHCI CMDs under the following conditions:
- No SD card plugged in (the card polling thread is running, CD irq disabled). - BCM2711's VPU clock[1] configured at 500MHz or more, lower clocks are OK.
There is no specific command that will time out, it seems random.
Here's what I found out. The SDHCI controller runs at 100MHz, by bumping the frequency to 150MHz the issue disapears. Might be pure luck, or maybe I hit the nail and it's proper interference. Can't say.
Regards, Nicolas
---
[1] For those who are not aware, here's the relationship between VPU's clock and emmc2's:
osc 54000000 plld 3000000091 plld_per 750000023 emmc2 149882908 pllc 2999999988 pllc_core0 999999996 vpu 499999998
Nicolas Saenz Julienne (2): ARM: dts: Fix-up EMMC2 controller's frequency mmc: sdhci-iproc: Set clock frequency as per DT
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 6 ++++++ drivers/mmc/host/sdhci-iproc.c | 10 ++++++++++ 2 files changed, 16 insertions(+)
-- 2.30.1
| |