lkml.org 
[lkml]   [2021]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] PCI: mediatek: Assert PERST# for 100ms for power and clock to stabilize
Date
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
be delayed 100ms (TPVPERL) for the power and clock to become stable.

Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com>
Acked-by: Pali Rohár <pali@kernel.org>
---

v3:
- Change subject.

v2:
- Typo fix.
- Rewrap into one paragraph.

drivers/pci/controller/pcie-mediatek.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 2f3f974977a3..b18935e8da89 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -702,6 +702,13 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
*/
writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);

+ /*
+ * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
+ * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
+ * be delayed 100ms (TPVPERL) for the power and clock to become stable.
+ */
+ msleep(100);
+
/* De-assert PHY, PE, PIPE, MAC and configuration reset */
val = readl(port->base + PCIE_RST_CTRL);
val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
--
2.25.1
\
 
 \ /
  Last update: 2021-12-27 14:33    [W:0.192 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site