lkml.org 
[lkml]   [2021]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: dwc: Fix integrated MSI Receiver mask reg setting during resume
Date
If the host which makes use of the IP's integrated MSI Receiver losts
power during suspend, we call dw_pcie_setup_rc() to reinit the RC. But
dw_pcie_setup_rc() always set the pp->irq_mask[ctrl] as ~0, so the mask
register is always set as 0xffffffff incorrectly, thus the MSI can't
work after resume.

Fix this issue by moving pp->irq_mask[ctrl] initialization to
dw_pcie_host_init(), so we can correctly set the mask reg during both
boot and resume.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
drivers/pci/controller/dwc/pcie-designware-host.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index f4755f3a03be..2fa86f32d964 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -362,6 +362,12 @@ int dw_pcie_host_init(struct pcie_port *pp)
if (ret < 0)
return ret;
} else if (pp->has_msi_ctrl) {
+ u32 ctrl, num_ctrls;
+
+ num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
+ for (ctrl = 0; ctrl < num_ctrls; ctrl++)
+ pp->irq_mask[ctrl] = ~0;
+
if (!pp->msi_irq) {
pp->msi_irq = platform_get_irq_byname_optional(pdev, "msi");
if (pp->msi_irq < 0) {
@@ -541,7 +547,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)

/* Initialize IRQ Status array */
for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
- pp->irq_mask[ctrl] = ~0;
dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK +
(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
pp->irq_mask[ctrl]);
--
2.34.1
\
 
 \ /
  Last update: 2021-12-26 08:48    [W:0.098 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site