Messages in this thread | ![/](/images/icornerl.gif) | | Date | Tue, 14 Dec 2021 13:48:05 +0800 | From | Shawn Guo <> | Subject | Re: [PATCH v2 6/8] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus |
| |
On Fri, Dec 03, 2021 at 06:17:16PM -0600, Li Yang wrote: > From: Biwen Li <biwen.li@nxp.com> > > The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts. > > Signed-off-by: Biwen Li <biwen.li@nxp.com> > Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Do we need a Fixes tag?
Shawn
> --- > arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > index 00d5b81bdef3..baa1cc9b9835 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts > @@ -276,11 +276,6 @@ temperature-sensor@4c { > vcc-supply = <&sb_3v3>; > }; > > - rtc@51 { > - compatible = "nxp,pcf2129"; > - reg = <0x51>; > - }; > - > eeprom@56 { > compatible = "atmel,24c512"; > reg = <0x56>; > @@ -322,6 +317,15 @@ mux: mux-controller { > > }; > > +&i2c1 { > + status = "okay"; > + > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > +}; > + > &enetc_port1 { > phy-handle = <&qds_phy1>; > phy-mode = "rgmii-id"; > -- > 2.25.1 >
| ![\](/images/icornerr.gif) |