lkml.org 
[lkml]   [2020]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/4] dt-bindings: media: imx274: Move clock and supplies to required properties
Date
Clock and supplies are external to IMX274 sensor and are dependent
on camera module design.

So, this patch moves them to required properties.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
Documentation/devicetree/bindings/media/i2c/imx274.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
index d0a5c899..b43bed6 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -10,15 +10,15 @@ at 1440 Mbps.
Required Properties:
- compatible: value should be "sony,imx274" for imx274 sensor
- reg: I2C bus address of the device
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
- clocks: Reference to the input clock.
- clock-names: Should be "inck".
- vana-supply: Sensor 2.8v analog supply.
- vdig-supply: Sensor 1.8v digital core supply.
- vddl-supply: Sensor digital IO 1.2v supply.

+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
The imx274 device node should contain one 'port' child node with
an 'endpoint' subnode. For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
--
2.7.4
\
 
 \ /
  Last update: 2020-08-31 21:53    [W:0.066 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site