Messages in this thread | | | Date | Mon, 31 Aug 2020 23:40:05 +0300 | From | Sakari Ailus <> | Subject | Re: [PATCH v4 3/4] dt-bindings: media: imx274: Move clock and supplies to required properties |
| |
On Mon, Aug 31, 2020 at 01:37:21PM -0700, Sowjanya Komatineni wrote: > > On 8/31/20 1:17 PM, Sakari Ailus wrote: > > Hi Sowjanya, > > > > On Mon, Aug 31, 2020 at 12:52:37PM -0700, Sowjanya Komatineni wrote: > > > Clock and supplies are external to IMX274 sensor and are dependent > > > on camera module design. > > > > > > So, this patch moves them to required properties. > > > > > > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> > > > --- > > > Documentation/devicetree/bindings/media/i2c/imx274.txt | 6 +++--- > > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > index d0a5c899..b43bed6 100644 > > > --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > @@ -10,15 +10,15 @@ at 1440 Mbps. > > > Required Properties: > > > - compatible: value should be "sony,imx274" for imx274 sensor > > > - reg: I2C bus address of the device > > > - > > > -Optional Properties: > > > -- reset-gpios: Sensor reset GPIO > > > - clocks: Reference to the input clock. > > > - clock-names: Should be "inck". > > > - vana-supply: Sensor 2.8v analog supply. > > > - vdig-supply: Sensor 1.8v digital core supply. > > > - vddl-supply: Sensor digital IO 1.2v supply. > > If these have been optional in the past I don't think we can start > > requiring them now. > > > > The framework will just give the driver a dummy regulator if one isn't > > found. > These were added recently with my patches. So I hope should be ok to make > them required as they are external to sensor
The bindings were added back in 2017, so they're not really recent.
-- Sakari Ailus
| |