lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] dmaengine: axi-dmac: add support for reading bus attributes from register
Date
The series adds support for reading the DMA bus attributes from the
INTERFACE_DESCRIPTION (0x10) register.

The first 5 changes are a bit of rework prior to adding the actual
change in patch 6, as things need to be shifted around a bit, to enable
the clock to be enabled earlier, to be able to read the version
register.

Changelog v1 -> v2:
* fixed error-exit paths for the clock move patch
i.e. 'dmaengine: axi-dmac: move clock enable earlier'
* fixed error-exit path for patch
'axi-dmac: wrap channel parameter adjust into function'
* added patch 'dmaengine: axi-dmac: move active_descs list init after device-tree init'
the list of active_descs can be moved a bit lower in the init/probe

Alexandru Ardelean (6):
dmaengine: axi-dmac: move version read in probe
dmaengine: axi-dmac: move active_descs list init after device-tree
init
dmaengine: axi-dmac: move clock enable earlier
dmaengine: axi-dmac: wrap entire dt parse in a function
dmaengine: axi-dmac: wrap channel parameter adjust into function
dmaengine: axi-dmac: add support for reading bus attributes from
registers

drivers/dma/dma-axi-dmac.c | 138 ++++++++++++++++++++++++++++---------
1 file changed, 107 insertions(+), 31 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-08-25 14:49    [W:0.071 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site