lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH v3 0/4] regulator: mp886x: two features and dt json convert
This is to improve the mp886x regulator driver support.
patch1 implments .set_ramp_delay
patch2 and patch3 support the switch freq setting
patch4 converts dt binding to json-schema

Since v2:
- Use mps,switch-frequency-hz instead of mps,switch-frequency
- Add "maxItems: 2" to "mps,fb-voltage-divider" in dt-binding
- Add a $ref to regulator.yaml in dt-binding

Since v1:
- put any schema conversions at the end of the series as Mark
suggested.

Jisheng Zhang (4):
regulator: mp886x: implement set_ramp_delay
dt-bindings: regulator: mp886x: support mps,switch-frequency-hz
regulator: mp886x: support setting switch freq
dt-bindings: regulator: Convert mp886x to json-schema

.../devicetree/bindings/regulator/mp886x.txt | 27 -----
.../bindings/regulator/mps,mp886x.yaml | 61 ++++++++++
drivers/regulator/mp886x.c | 109 +++++++++++++++++-
3 files changed, 167 insertions(+), 30 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml

--
2.28.0

\
 
 \ /
  Last update: 2020-08-20 11:19    [W:0.097 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site