lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] input: misc: Add IBM Operation Panel driver
Date
This series adds support for input from the IBM Operation Panel, which is
a simple controller with three buttons and an LCD display meant for
interacting with a server. It's connected over I2C. This series only
supports the input from the panel, in which the panel masters the I2C bus
and sends data to the host system when someone presses a button on the
controller.

Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device
ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device

.../bindings/input/ibm,op-panel.yaml | 38 ++++
MAINTAINERS | 7 +
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 +
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 +
drivers/i2c/busses/i2c-aspeed.c | 1 +
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/ibm-panel.c | 186 ++++++++++++++++++
8 files changed, 255 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/ibm,op-panel.yaml
create mode 100644 drivers/input/misc/ibm-panel.c

--
2.26.2

\
 
 \ /
  Last update: 2020-08-20 18:14    [W:0.148 / U:19.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site