lkml.org 
[lkml]   [2020]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 2/7] net: dsa: mt7530: support full-duplex gigabit only
Date
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.

Signed-off-by: Landen Chao <landen.chao@mediatek.com>
---
drivers/net/dsa/mt7530.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..0fd50798aa42 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1501,7 +1501,7 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
phylink_set(mask, 100baseT_Full);

if (state->interface != PHY_INTERFACE_MODE_MII) {
- phylink_set(mask, 1000baseT_Half);
+ /* MT7530 and MT7531 only support 1G full-duplex. */
phylink_set(mask, 1000baseT_Full);
if (port == 5)
phylink_set(mask, 1000baseX_Full);
--
2.17.1
\
 
 \ /
  Last update: 2020-08-18 09:16    [W:0.189 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site