lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver
From
Date
On 6/22/20 2:43 PM, Kurt Van Dijck wrote:
> I get RX-0: FIFO overflows in listen-only mode (back-to-back burst of
> the single other node).

Single other node? Who's ACKing the CAN frames?

> The SPI peripheral does not use DMA :-(.

The SPI messages are quite small, so DMA wont help either. Getting rid of the
IRQ and polling for completion is the way to go.

> Do you have, by accident, some freescale SPI fixes lying around?

nope

> It's not the biggest problem on my side, but is proves the system not
> being guarded against load.

Do you have freq scaling activated?

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2020-06-22 14:55    [W:0.128 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site