lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver
Marc,

I get RX-0: FIFO overflows in listen-only mode (back-to-back burst of
the single other node).
The SPI peripheral does not use DMA :-(.
Do you have, by accident, some freescale SPI fixes lying around?

It's not the biggest problem on my side, but is proves the system not
being guarded against load.

Kurt

On ma, 22 jun 2020 14:30:31 +0200, Kurt Van Dijck wrote:
>
> On ma, 22 jun 2020 12:55:41 +0200, Marc Kleine-Budde wrote:
> > On 6/22/20 12:25 PM, Kurt Van Dijck wrote:
> > > I got my board up with a 5.7, despite device-tree problems completely
> > > unrelated to CAN.
> >
> > \o/
> >
> > > It seems to work well with a fully-loaded CAN bus (cangen -g0 ...).
> > > So that is a real improvement.
> >
> > Can I add your Tested-by?
> yes.
> >
> > > I will need to add the listen-only mode soon.
> >
> > Patches are always welcome!
> >
> > regards,
> > Marc

\
 
 \ /
  Last update: 2020-06-22 14:44    [W:0.108 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site