lkml.org 
[lkml]   [2020]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: net: dsa: qca8k: document SGMII properties
On Fri, Jun 05, 2020 at 07:10:02PM +0100, Jonathan McDowell wrote:
> This patch documents the qca8k's SGMII related properties that allow
> configuration of the SGMII port.
>
> Signed-off-by: Jonathan McDowell <noodles@earth.li>
> ---
> Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> index ccbc6d89325d..9e7d74a248ad 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> @@ -11,7 +11,11 @@ Required properties:
>
> Optional properties:
>
> +- disable-serdes-autoneg: Boolean, disables auto-negotiation on the SerDes
> - reset-gpios: GPIO to be used to reset the whole device
> +- sgmii-delay: Boolean, presence delays SGMII clock by 2ns
> +- sgmii-mode: String, operation mode of the SGMII interface.
> + Supported values are: "basex", "mac", "phy".

Either these should be common properties and documented in a common
spot or they need vendor prefixes. They seem like they former to me
(though 'sgmii-delay' would need to be more general and take a time).

Rob

\
 
 \ /
  Last update: 2020-06-15 19:46    [W:0.362 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site