lkml.org 
[lkml]   [2020]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] docs: admin-guide: Clarify sentences
Changes to make the text more formal and organized. The reasons are now cited and described at the same time.
Minor grammatical problems have also been fixed.

Signed-off-by: Cristian Souza <cristianmsbr@gmail.com>
---
Documentation/admin-guide/init.rst | 35 ++++++++++++++----------------
1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/Documentation/admin-guide/init.rst b/Documentation/admin-guide/init.rst
index 68f2f6cf456b..0c2c9138f268 100644
--- a/Documentation/admin-guide/init.rst
+++ b/Documentation/admin-guide/init.rst
@@ -1,34 +1,30 @@
-Explaining the dreaded "No working init found." boot hang message
-=================================================================
+Explaining the "No working init found." boot hang message
+=========================================================

-OK, so you have got this pretty unintuitive message (currently located
-in init/main.c) and are wondering what went wrong.
-Some high-level reasons for failure (listed roughly in order of execution)
-to load the init binary are:
+Message location: ``init/main.c``

-A) Unable to mount root FS
-B) init binary doesn't exist on rootfs
-C) Broken console device
-D) Binary exists but dependencies not available
-E) Binary cannot be loaded
+This document provides some high-level reasons for failure
+(listed roughly in order of execution) to load the init binary.

-Detailed explanations:
-
-A) Set "debug" kernel parameter (in bootloader config file or CONFIG_CMDLINE)
+1) **Unable to mount root FS**: Set "debug" kernel parameter (in bootloader config file or CONFIG_CMDLINE)
to get more detailed kernel messages.
-B) Make sure you have the correct root FS type
+
+2) **init binary doesn't exist on rootfs**: Make sure you have the correct root FS type
(and ``root=`` kernel parameter points to the correct partition),
required drivers such as storage hardware (such as SCSI or USB!)
and filesystem (ext3, jffs2, etc.) are builtin (alternatively as modules,
- to be pre-loaded by an initrd)
-C) Possibly a conflict in ``console= setup`` --> initial console unavailable.
+ to be pre-loaded by an initrd).
+
+3) **Broken console device**: Possibly a conflict in ``console= setup`` --> initial console unavailable.
E.g. some serial consoles are unreliable due to serial IRQ issues (e.g.
missing interrupt-based configuration).
Try using a different ``console= device`` or e.g. ``netconsole=``.
-D) E.g. required library dependencies of the init binary such as
+
+4) **Binary exists but dependencies not available**: E.g. required library dependencies of the init binary such as
``/lib/ld-linux.so.2`` missing or broken. Use
``readelf -d <INIT>|grep NEEDED`` to find out which libraries are required.
-E) Make sure the binary's architecture matches your hardware.
+
+5) **Binary cannot be loaded**: Make sure the binary's architecture matches your hardware.
E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM hardware.
In case you tried loading a non-binary file here (shell script?),
you should make sure that the script specifies an interpreter in its shebang
@@ -50,3 +46,4 @@ Further TODOs:
e.g. by providing additional error messages at affected places.

Andreas Mohr <andi at lisas period de>
+Cristian Souza <cristianmsbr at gmail period com>
--
2.25.1
\
 
 \ /
  Last update: 2020-04-08 16:47    [W:0.060 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site