lkml.org 
[lkml]   [2020]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: net: phy: micrel: add LED mode behavior and select properties
Date
Add LED mode behavior and LED mode select properties which can be used
in KSZ9131 PHY.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
Documentation/devicetree/bindings/net/micrel.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a5..3022c979287a 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -16,9 +16,16 @@ Optional properties:
KSZ8051: register 0x1f, bits 5..4
KSZ8081: register 0x1f, bits 5..4
KSZ8091: register 0x1f, bits 5..4
+ KSZ9131: register 0x1a, bit 14

See the respective PHY datasheet for the mode values.

+ - micrel,led-mode-select
+ See the respective PHY datasheet for the mode select values.
+
+ - micrel,led-mode-behavior
+ See the respective PHY datasheet for the mode behavior values.
+
- micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
bit selects 25 MHz mode

--
2.21.1
\
 
 \ /
  Last update: 2020-12-09 15:02    [W:0.047 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site