lkml.org 
[lkml]   [2019]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] keep console alive even if missing the 'enable' clock
Date
From: Chunyan Zhang <chunyan.zhang@unisoc.com>

After the commit 4007098f4ce4 (serial: sprd: Add power management for the Spreadtrum serial controller),
the 'enable' clock was forced to be configured in device tree, otherwise the uart devices couldn't be
probed successfully.

With this patch-set, the uart device which is used as console would be allowed to register even without
any clock configured in device tree, this will make debug easier.

Chunyan Zhang (3):
serial: sprd: check the right port and membase
serial: sprd: add console_initcall in sprd's uart driver
serial: sprd: keep console alive even if missing the 'enable' clock

drivers/tty/serial/sprd_serial.c | 42 ++++++++++++++++++++++++++------
1 file changed, 34 insertions(+), 8 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2019-08-26 09:30    [W:0.388 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site