Messages in this thread | | | From | Martin Blumenstingl <> | Date | Tue, 20 Aug 2019 22:11:04 +0200 | Subject | Re: [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610 |
| |
Hi Neil,
On Tue, Aug 20, 2019 at 4:43 PM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Add support for the Amlogic SM1 Based SEI610 board. > > The SM1 SoC is a derivative of the G12A SoC Family with : > - Cortex-A55 core instead of A53 > - more power domains, including USB & PCIe > - a neural network co-processor (NNA) > - a CSI input and image processor > - some changes in the audio complex, thus not yet enabled > > The SEI610 board is a derivative of the SEI510 board with : > - removed ADC based touch button, replaced with 3x GPIO buttons > - physical switch disabling on-board MICs > - USB-C port for USB 2.0 OTG > - On-board FTDI USB2SERIAL port for Linux console > > Audio, Display and USB support will be added later when support of the > corresponding power domains will be added, for now they are kept disabled. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> I don't have any details about this board but overall this looks sane, so: Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[...] > + /* Used by Tuner, RGB Led & IR Emitter LED array */ > + vddao_3v3_t: regultor-vddao_3v3_t { that should be regulator-vddao_3v3_t - maybe Kevin can fix this up, if not then we can still fix it with a follow-up patch
Martin
| |