lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm: dts: rockchip: fix vcc_host_5v regulator for usb3 host
Date
According to rock64 schemetic V2 and V3, the VCC_HOST_5V output is
controlled by USB_20_HOST_DRV, which is the same as VCC_HOST1_5V.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 7cfd5ca6cc85..bd4ad1635e0b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -35,9 +35,9 @@
vcc_host_5v: vcc-host-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&usb30_host_drv>;
+ pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host_5v";
regulator-always-on;
regulator-boot-on;
@@ -320,12 +320,6 @@
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- usb3 {
- usb30_host_drv: usb30-host-drv {
- rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
};

&sdmmc {
--
2.17.1
\
 
 \ /
  Last update: 2019-08-15 05:02    [W:1.003 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site