lkml.org 
[lkml]   [2019]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Bluetooth: hci_bcm: Fix empty regulator supplies for Intel Macs
This fixes the issue for hanging at modprobe intel-lpss-pci on my
macbook pro 13,3 2016.

Error in dmesg:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000090

Thanks a lot!

Tested-by: Dick Marinus <dick@mrns.nl>
> From: Chen-Yu Tsai <wens@csie.org>
>
> The code path for Macs goes through bcm_apple_get_resources(), which
> skips over the code that sets up the regulator supplies. As a result,
> the call to regulator_bulk_enable() / regulator_bulk_disable() results
> in a NULL pointer dereference.
>
> This was reported on the kernel.org Bugzilla, bug 202963.
>
> Unbreak Broadcom Bluetooth support on Intel Macs by checking if the
> supplies were set up before enabling or disabling them.
>
> The same does not need to be done for the clocks, as the common clock
> framework API checks for NULL pointers.
>
> Fixes: 75d11676dccb ("Bluetooth: hci_bcm: Add support for regulator supplies")
> Cc: <stable@vger.kernel.org> # 5.0.x
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>
> I do not own a Mac, so this needs to be tested by someone else.
>
> ---
> drivers/bluetooth/hci_bcm.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
> index ddbe518c3e5b..b5d31d583d60 100644
> --- a/drivers/bluetooth/hci_bcm.c
> +++ b/drivers/bluetooth/hci_bcm.c
> @@ -228,9 +228,15 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
> int err;
>
> if (powered && !dev->res_enabled) {
> - err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies);
> - if (err)
> - return err;
> + /* Intel Macs use bcm_apple_get_resources() and don't
> + * have regulator supplies configured.
> + */
> + if (dev->supplies[0].supply) {
> + err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
> + dev->supplies);
> + if (err)
> + return err;
> + }
>
> /* LPO clock needs to be 32.768 kHz */
> err = clk_set_rate(dev->lpo_clk, 32768);
> @@ -259,7 +265,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
> if (!powered && dev->res_enabled) {
> clk_disable_unprepare(dev->txco_clk);
> clk_disable_unprepare(dev->lpo_clk);
> - regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
> +
> + /* Intel Macs use bcm_apple_get_resources() and don't
> + * have regulator supplies configured.
> + */
> + if (dev->supplies[0].supply)
> + regulator_bulk_disable(BCM_NUM_SUPPLIES,
> + dev->supplies);
> }
>
> /* wait for device to power on and come out of reset */
> --
> 2.20.1

\
 
 \ /
  Last update: 2019-04-20 10:30    [W:0.025 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site