lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 net-next] mdio_bus: Fix PTR_ERR() usage after initialization to constant
Date
Fix coccinelle warning:

./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44
./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44

fix this by using IS_ERR before PTR_ERR

Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
v2: remove variable 'ret'
---
drivers/net/phy/mdio_bus.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 3d31358..debc74c 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -48,11 +48,12 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode,
"reset-gpios", 0, GPIOD_OUT_LOW,
"PHY reset");
- if (PTR_ERR(gpiod) == -ENOENT ||
- PTR_ERR(gpiod) == -ENOSYS)
- gpiod = NULL;
- else if (IS_ERR(gpiod))
- return PTR_ERR(gpiod);
+ if (IS_ERR(gpiod)) {
+ if (PTR_ERR(gpiod) == -ENOENT || PTR_ERR(gpiod) == -ENOSYS)
+ gpiod = NULL;
+ else
+ return PTR_ERR(gpiod);
+ }

mdiodev->reset = gpiod;

--
2.7.4

\
 
 \ /
  Last update: 2019-02-16 04:03    [W:0.025 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site