Messages in this thread | | | From | Hanjie Lin <> | Subject | [RESEND PATCH v3 0/2] add the Amlogic Meson PCIe controller driver | Date | Fri, 21 Sep 2018 14:03:38 +0800 |
| |
This is v3 post RESEND: [2] - add Rob's Reviewed-by to patch 1/2 - add more to&cc list suggested by get_maintainer.pl
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patchset add the driver and dt-bindings of the controller.
Till patch v2, we have a dedicated phy driver which only process reset job. It's too overkill so we integrate phy driver into the controller.
Changes since v2: [1] - abandon phy driver, move reset to the controller - use devm_add_action_or_reset() to use clock res - format correcting
Changes since v1: [0] - use gpio lib instead open code - move 'apb' and 'port' reset from phy driver - format correcting
[0] : https://lkml.kernel.org/r/1534227522-186798-1-git-send-email-hanjie.lin@amlogic.com [1] : https://lkml.kernel.org/r/1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com [2] : https://lkml.kernel.org/r/1535616829-167936-1-git-send-email-hanjie.lin@amlogic.com
Yue Wang (2): dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller PCI: meson: add the Amlogic Meson PCIe controller driver
.../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 +++ drivers/pci/controller/dwc/Kconfig | 12 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pci-meson.c | 617 +++++++++++++++++++++ 4 files changed, 700 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt create mode 100644 drivers/pci/controller/dwc/pci-meson.c
-- 2.7.4
| |