lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats
Hi,

On Fri, Jun 01, 2018 at 10:34:34AM -0700, Guenter Roeck wrote:
> On Fri, Jun 01, 2018 at 10:23:59AM -0700, Brian Norris wrote:
> > drivers/power/supply/sbs-battery.c | 54 +++++++++++++++++++++++++-----
> > 1 file changed, 46 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
> > index 83d7b4115857..8dea63464a3f 100644
> > --- a/drivers/power/supply/sbs-battery.c
> > +++ b/drivers/power/supply/sbs-battery.c
...

> > @@ -315,6 +320,27 @@ static int sbs_status_correct(struct i2c_client *client, int *intval)
> > static int sbs_get_battery_presence_and_health(
> > struct i2c_client *client, enum power_supply_property psp,
> > union power_supply_propval *val)
> > +{
> > + int ret;
> > +
> > + if (psp == POWER_SUPPLY_PROP_PRESENT) {
> > + /* Dummy command; if it succeeds, battery is present. */
> > + ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
> > + if (ret < 0)
> > + val->intval = 0; /* battery disconnected */
> > + else
> > + val->intval = 1; /* battery present */
> > + return 0;
> > + } else { /* POWER_SUPPLY_PROP_HEALTH */
>
> Static analyzers may complain that else after return is unnecessary.

I noticed (checkpatch complains) but decided I didn't care. It would be
worse to promote the 'else' to top-level (things would look asymmetric).
I suppose I could pull the 'return 0' out, but I'm not sure that would
make the code any better.

> Other than that
>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>
> > + /* SBS spec doesn't have a general health command. */
> > + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> > + return 0;
> > + }
> > +}
> > +

Brian

\
 
 \ /
  Last update: 2018-06-01 20:31    [W:0.057 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site