lkml.org 
[lkml]   [2018]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/9] Add PCI region2 iomap for SBZ
On Thu, 03 May 2018 23:42:44 +0200,
Connor McAdams wrote:
>
> @@ -4691,8 +4699,17 @@ static void ca0132_free(struct hda_codec *codec)
>
> cancel_delayed_work_sync(&spec->unsol_hp_work);
> snd_hda_power_up(codec);
> - snd_hda_sequence_write(codec, spec->base_exit_verbs);
> - ca0132_exit_chip(codec);
> + switch (spec->quirk) {
> + case QUIRK_SBZ:
> + iounmap(spec->mem_base);
> + snd_hda_sequence_write(codec, spec->base_exit_verbs);
> + ca0132_exit_chip(codec);
> + break;

Do you need to unmap before the rest procedure?
Usually the unmapping happens at the last, after all commands
finished.

> + default:
> + snd_hda_sequence_write(codec, spec->base_exit_verbs);
> + ca0132_exit_chip(codec);
> + break;
> + }
> snd_hda_power_down(codec);
> kfree(spec->spec_init_verbs);
> kfree(codec->spec);

So in this case, a cleaner way would be to add the conditional iounmap
like:

snd_hda_power_down(codec);
if (spec->mem_base)
iounmap(spec->mem_base);
kfree(spec->spec_init_verbs);
kfree(codec->spec);

> @@ -4909,6 +4926,15 @@ static int patch_ca0132(struct hda_codec *codec)
> else
> spec->quirk = QUIRK_NONE;
>
> + /* Setup BAR Region 2 for Sound Blaster Z */
> + if (spec->quirk == QUIRK_SBZ) {
> + spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20);
> + if (spec->mem_base == NULL) {
> + codec_dbg(codec, "pci_iomap failed!");
> + codec_dbg(codec, "perhaps this is not an SBZ?");

This should be shown more explicitly, so better to be codec_warn() or
codec_info().


thanks,

Takashi

\
 
 \ /
  Last update: 2018-05-04 11:27    [W:0.055 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site