lkml.org 
[lkml]   [2018]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/9] R3Di and SBZ quirk entires + alt firmware loading
Date
This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di.
Only the currently tested ID's have been added.

This patch also adds the ability to load alternative firmwares for each
card, the firmwares can be obtained from within the Windows driver.
The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses
"ctefx-sbz.bin". If the alternative firmware for the given quirk is not
found, the original ctefx.bin will be used. This has been confirmed to
work for both the R3Di and the SBZ.

This patch also makes the character array *dirstr a const.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 55 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 768ea86..9a0286e 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -72,12 +72,16 @@
#define SCP_GET 1

#define EFX_FILE "ctefx.bin"
+#define SBZ_EFX_FILE "ctefx-sbz.bin"
+#define R3DI_EFX_FILE "ctefx-r3di.bin"

#ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP
MODULE_FIRMWARE(EFX_FILE);
+MODULE_FIRMWARE(SBZ_EFX_FILE);
+MODULE_FIRMWARE(R3DI_EFX_FILE);
#endif

-static char *dirstr[2] = { "Playback", "Capture" };
+static const char *dirstr[2] = { "Playback", "Capture" };

enum {
SPEAKER_OUT,
@@ -734,6 +738,7 @@ struct ca0132_spec {
unsigned int scp_resp_header;
unsigned int scp_resp_data[4];
unsigned int scp_resp_count;
+ bool alt_firmware_present;

/* mixer and effects related */
unsigned char dmic_ctl;
@@ -762,6 +767,8 @@ struct ca0132_spec {
enum {
QUIRK_NONE,
QUIRK_ALIENWARE,
+ QUIRK_SBZ,
+ QUIRK_R3DI,
};

static const struct hda_pintbl alienware_pincfgs[] = {
@@ -782,6 +789,10 @@ static const struct snd_pci_quirk ca0132_quirks[] = {
SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
+ SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ),
+ SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ),
+ SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI),
+ SND_PCI_QUIRK(0x1458, 0xA036, "Recon3Di", QUIRK_R3DI),
{}
};

@@ -4370,11 +4381,47 @@ static void ca0132_set_dsp_msr(struct hda_codec *codec, bool is96k)
static bool ca0132_download_dsp_images(struct hda_codec *codec)
{
bool dsp_loaded = false;
+ struct ca0132_spec *spec = codec->spec;
const struct dsp_image_seg *dsp_os_image;
const struct firmware *fw_entry;
-
- if (request_firmware(&fw_entry, EFX_FILE, codec->card->dev) != 0)
- return false;
+ /*
+ * Alternate firmwares for different variants. The Recon3Di apparently
+ * can use the default firmware, but I'll leave the option in case
+ * it needs it again.
+ */
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ if (request_firmware(&fw_entry, SBZ_EFX_FILE,
+ codec->card->dev) != 0) {
+ codec_dbg(codec, "SBZ alt firmware not detected. ");
+ spec->alt_firmware_present = false;
+ } else {
+ codec_dbg(codec, "Sound Blaster Z firmware selected.");
+ spec->alt_firmware_present = true;
+ }
+ break;
+ case QUIRK_R3DI:
+ if (request_firmware(&fw_entry, R3DI_EFX_FILE,
+ codec->card->dev) != 0) {
+ codec_dbg(codec, "Recon3Di alt firmware not detected.");
+ spec->alt_firmware_present = false;
+ } else {
+ codec_dbg(codec, "Recon3Di firmware selected.");
+ spec->alt_firmware_present = true;
+ }
+ break;
+ default:
+ spec->alt_firmware_present = false;
+ break;
+ }
+ /* Use default ctefx.bin if no alt firmware is detected, or if none
+ * exists for your particular codec.
+ */
+ if (spec->alt_firmware_present == false) {
+ codec_dbg(codec, "Default firmware selected.");
+ if (request_firmware(&fw_entry, EFX_FILE,
+ codec->card->dev) != 0)
+ return false;
+ }

dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
--
2.7.4
\
 
 \ /
  Last update: 2018-05-03 23:43    [W:0.633 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site