lkml.org 
[lkml]   [2018]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: binding: Fix "#cooling-cells" property's name
Date
It should be "#cooling-cells" instead of "cooling-cells". Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
index 439a7430fc68..2becdcfdc840 100644
--- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
@@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines
must have the RPM values in ascending order.
- alarm-gpios: This pin going active indicates something is wrong with
the fan, and a udev event will be fired.
-- cooling-cells: If used as a cooling device, must be <2>
+- #cooling-cells: If used as a cooling device, must be <2>
Also see: Documentation/devicetree/bindings/thermal/thermal.txt
min and max states are derived from the speed-map of the fan.

--
2.15.0.194.g9af6a3dea062
\
 
 \ /
  Last update: 2018-05-25 07:20    [W:0.473 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site