Messages in this thread Patch in this message | | | From | Enric Balletbo i Serra <> | Subject | [RESEND PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle. | Date | Wed, 28 Mar 2018 19:03:23 +0200 |
| |
Before this patch the enable signal was set before the PWM signal and vice-versa on power off. This sequence is wrong, at least, it is on the different panels datasheets that I checked, so I inverted the sequence to follow the specs.
For reference the following panels have the mentioned sequence: - N133HSE-EA1 (Innolux) - N116BGE (Innolux) - N156BGE-L21 (Innolux) - B101EAN0 (Auo) - B101AW03 (Auo) - LTN101NT05 (Samsung) - CLAA101WA01A (Chunghwa)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> --- Changes since v5: - Add Acked-by: Thierry Reding <thierry.reding@gmail.com> Changes since v4: - Rebase on top of mainline. - Add the acks from Daniel Thompson and Jingoo Han. Changes since v3: - List the part numbers for the panel checked (Daniel Thompson) Changes since v2: - Add this as a separate patch (Thierry Reding) Changes since v1: - None --- drivers/video/backlight/pwm_bl.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 1c2289ddd555..698ec68bcdc9 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) if (err < 0) dev_err(pb->dev, "failed to enable power supply\n"); + pwm_enable(pb->pwm); + if (pb->enable_gpio) gpiod_set_value_cansleep(pb->enable_gpio, 1); - pwm_enable(pb->pwm); pb->enabled = true; } @@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) if (!pb->enabled) return; - pwm_config(pb->pwm, 0, pb->period); - pwm_disable(pb->pwm); - if (pb->enable_gpio) gpiod_set_value_cansleep(pb->enable_gpio, 0); + pwm_config(pb->pwm, 0, pb->period); + pwm_disable(pb->pwm); + regulator_disable(pb->power_supply); pb->enabled = false; } -- 2.16.2
| |