lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/6] dt-bindings: phy-qcom-qmp: Update bindings for sdm845
Hi,

On Thu, Mar 22, 2018 at 11:11 PM, Manu Gautam <mgautam@codeaurora.org> wrote:
> Update compatible strings for USB3 PHYs on SDM845.
> One is QMPv3 DisplayPort-USB combo PHY and other one
> is USB UNI PHY which is single lane USB3 PHY without
> DP capability.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index dcf1b8f..cef8765 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -9,7 +9,9 @@ Required properties:
> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> - "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
> + "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy,
> + "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
> + "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.

I'm confused. What value does "qcom,qmp-v3-usb3-phy" have as a
separate entry from "qcom,sdm845-qmp-usb3-phy"? Is
"qcom,qmp-v3-usb3-phy" expected to work on some non-SDM845 based
device?

Personally I think you should remove "qcom,qmp-v3-usb3-phy" from the
bindings as part of this patch (replacing it with the new string
qcom,sdm845-qmp-usb3-phy)". Yeah, yeah bindings are forever. ...but
that particular string was added about a month ago and (I believe) it
was intended for SDM845 anyway. As per
<https://patchwork.kernel.org/patch/10302759/> match to the exact same
PHY data which leads extra credence to my belief.

If later on you find that some future chip can use the exact same
driver / settings as the SDM845 you can always list the
"qcom,sdm845-qmp-usb3-phy" string as a secondary compatible anyway.


-Doug

\
 
 \ /
  Last update: 2018-03-27 23:38    [W:1.019 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site