lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/6] phy: qcom: Updates for USB PHYs on SDM845
Date
SDM845 has two USB instances each with QUSB2 and QMP PHYs.
One of the QMP PHY is USB-DP (DisplayPort) combo PHY where
as other one is single lane UNI-PHY (without DP support).
Changes are related to PHY configuration for electrical
parameters tuning to improve eye-diagram and some fixes.

Changes since v2:
- Use separate phy_ops for USB to not register power_on op.
- And other minor changes as per review comments from Stephen.

Changes since v1:
- Updated qusb2 compatibility name as per comment from Vivek.

Manu Gautam (6):
phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS
phy: qcom-qusb2: Fix crash if nvmem cell not specified
dt-bindings: phy-qcom-qmp: Update bindings for sdm845
phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845
dt-bindings: phy-qcom-usb2: Update bindings for sdm845
phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845

.../devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +-
.../devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 181 ++++++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp.h | 5 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 43 +++++
5 files changed, 234 insertions(+), 3 deletions(-)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-03-23 07:12    [W:0.203 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site