Messages in this thread | | | From | Ard Biesheuvel <> | Subject | [PATCH v5 0/2] add support for Socionext SynQuacer I2C controller | Date | Fri, 2 Mar 2018 08:31:21 +0000 |
| |
Add a binding and a driver for the I2C IP found in the Socionext SynQuacer SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.
I think this is good to go now. Wolfram?
v5: - add Rob's ack to #1 - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2)
v4: - clarify binding that only a single interrupt specifier is expected (#1) - check return value of clk_prepare_enable() on probe path (#2) - add Andy's R-b to patch #2
v3: - incorporate more of Andy's review comments (#2), especially regarding the bus speed and clock source handling for ACPI - patch #1 unchanged.
v2: - incorporate Andy's review comments (#2) - patch #1 unchanged.
Ard Biesheuvel (2): dt-bindings: i2c: add binding for Socionext SynQuacer I2C i2c: add support for Socionext SynQuacer I2C controller
Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-synquacer.c | 791 ++++++++++++++++++++ 4 files changed, 831 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt create mode 100644 drivers/i2c/busses/i2c-synquacer.c
-- 2.11.0
| |