lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] mm, pkey: treat pkey-0 special
Date
Applications need the ability to associate an address-range with some
key and latter revert to its initial default key. Pkey-0 comes close to
providing this function but falls short, because the current
implementation disallows applications to explicitly associate pkey-0 to
the address range.

Clarify the semantics of pkey-0 and provide the corresponding
implementation.

Pkey-0 is special with the following semantics.
(a) it is implicitly allocated and can never be freed. It always exists.
(b) it is the default key assigned to any address-range.
(c) it can be explicitly associated with any address-range.

Tested on powerpc only. Could not test on x86.

cc: Thomas Gleixner <tglx@linutronix.de>
cc: Dave Hansen <dave.hansen@intel.com>
cc: Michael Ellermen <mpe@ellerman.id.au>
cc: Ingo Molnar <mingo@kernel.org>
cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
History:
v4 : (1) moved the code entirely in arch-independent location.
(2) fixed comments -- suggested by Thomas Gliexner
v3 : added clarification of the semantics of pkey0.
-- suggested by Dave Hansen
v2 : split the patch into two, one for x86 and one for powerpc
-- suggested by Michael Ellermen

Documentation/x86/protection-keys.txt | 8 ++++++++
mm/mprotect.c | 25 ++++++++++++++++++++++---
2 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/Documentation/x86/protection-keys.txt b/Documentation/x86/protection-keys.txt
index ecb0d2d..92802c4 100644
--- a/Documentation/x86/protection-keys.txt
+++ b/Documentation/x86/protection-keys.txt
@@ -88,3 +88,11 @@ with a read():
The kernel will send a SIGSEGV in both cases, but si_code will be set
to SEGV_PKERR when violating protection keys versus SEGV_ACCERR when
the plain mprotect() permissions are violated.
+
+====================== pkey 0 ==================================
+
+Pkey-0 is special. It is implicitly allocated. Applications cannot allocate or
+free that key. This key is the default key that gets associated with a
+addres-space. It can be explicitly associated with any address-space.
+
+================================================================
diff --git a/mm/mprotect.c b/mm/mprotect.c
index e3309fc..2c779fa 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -430,7 +430,13 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
* them use it here.
*/
error = -EINVAL;
- if ((pkey != -1) && !mm_pkey_is_allocated(current->mm, pkey))
+
+ /*
+ * pkey-0 is special. It always exists. No need to check if it is
+ * allocated. Check allocation status of all other keys. pkey=-1
+ * is not realy a key, it means; use any available key.
+ */
+ if (pkey && pkey != -1 && !mm_pkey_is_allocated(current->mm, pkey))
goto out;

vma = find_vma(current->mm, start);
@@ -549,6 +555,12 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
if (pkey == -1)
goto out;

+ if (!pkey) {
+ mm_pkey_free(current->mm, pkey);
+ printk("Internal error, cannot explicitly allocate key-0");
+ goto out;
+ }
+
ret = arch_set_user_pkey_access(current, pkey, init_val);
if (ret) {
mm_pkey_free(current->mm, pkey);
@@ -564,13 +576,20 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
{
int ret;

+ /*
+ * pkey-0 is special. Userspace can never allocate or free it. It is
+ * allocated by default. It always exists.
+ */
+ if (!pkey)
+ return -EINVAL;
+
down_write(&current->mm->mmap_sem);
ret = mm_pkey_free(current->mm, pkey);
up_write(&current->mm->mmap_sem);

/*
- * We could provie warnings or errors if any VMA still
- * has the pkey set here.
+ * We could provide warnings or errors if any VMA still has the pkey
+ * set here.
*/
return ret;
}
--
1.7.1
\
 
 \ /
  Last update: 2018-03-16 11:34    [W:0.078 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site